|
A1.
Installing
the TV Stand
-
Place the TV
flat on a table and insert the smaller plastic ring onto
the neck.
-
Install the
base onto the neck. Remember the deeper end is toward
the front.
-
Install the
larger plastic ring onto the bottom of the base, and the
metallic plate onto the plastic ring. Remember to match
the railing to the protruding metal piece and the 3
holes to the 3 plastic pegs.
-
Once you match the
railing and the 3 pegs to the metal plate, screw in the
7 screws to tighten the installation. Once you finish
doing that, you can stand the TV up and begin setting up
the TV for viewing.
 Top
|
. |
Section